PULWTOP BD216C Gray Vertical Laptop Dock Review: Closed-Lid Dual 4K on Windows
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
The PULWTOP BD216C is a vertical laptop stand with a USB-C dock built into its base, and this gray listing suits a closed-lid Windows desk: the laptop stands upright between two monitors while the dock drives both over HDMI at 4K 60Hz using MST. PULWTOP states it is not for Mac. Around the screens you get two 10Gbps USB-C data ports, one 10Gbps USB-A, two 5Gbps USB-A, a USB 2.0 port for a mouse or keyboard, Gigabit Ethernet and a USB-C PD input that passes 85W from a 100W charger. No charger is included, and PULWTOP recommends at least 65W. To wake an external screen with the lid shut, the charger must be connected and a mouse plugged into the USB 2.0 port. We based this on PULWTOP's listing and published specs, not hands-on use.
What stands out
- Vertical stand + 11-in-1 dock in one body
- 2 x HDMI 4K 60Hz (MST, Windows only)
- 2 x USB-C 10Gbps, 1 x USB-A 10Gbps, 2 x USB-A 5Gbps, 1 x USB 2.0
- Gigabit Ethernet, 85W from a 100W PD input
- 5.91 x 4.53 x 4.13 in, gray finish
Who it fits
Good fit for
Windows laptop users who run the laptop closed on the desk with two 4K monitors and want the stand and dock in one piece.
Who should skip it
MacBook users, anyone who wants to type on the laptop's own keyboard while docked, and people who need an SD slot or audio jack.
Verdict: A tidy all-in-one stand and dual 4K dock for closed-lid Windows desks; Mac owners need PULWTOP's BD216D instead.
PULWTOP BD216C specs explained
2 x HDMI 4K 60Hz via MST
Two independent desktops on Windows; Mac is not supported.
Built-in vertical slot
The laptop stands on its edge, so this setup assumes an external keyboard and mouse.
USB-C data ports: no video or charging
Monitors go on HDMI only; charge through the PD port.
85W from 100W PD, charger not included
Use at least a 65W PD charger, ideally 100W.
Clamshell wake
Charger connected plus a mouse on USB 2.0 wakes the external screens with the lid shut.
PULWTOP BD216C gray stand and port layout
The BD216C measures about 5.91 by 4.53 by 4.13 inches, with the laptop slot on top and ports in the base. This listing is the gray finish; PULWTOP sells the same BD216C in black. The base holds two HDMI, two 10Gbps USB-C, one 10Gbps USB-A, two 5Gbps USB-A, a USB 2.0 port, Gigabit Ethernet, the PD input and a USB-C host port. Standing the laptop upright frees desk space and leaves its underside open to air.
Closed-lid setup with the PULWTOP BD216C
Connect a 65W or larger PD charger (100W for the full 85W) to the PD port, run the host cable to a Thunderbolt 3/4/5, USB4 or full-featured USB-C port on a Windows laptop, and connect both monitors to HDMI. Plug a mouse into the USB 2.0 port, close the lid and stand the laptop in the slot; moving the mouse wakes the external screens. Put SSDs on the 10Gbps ports and printers or hard drives on the 5Gbps ones. No driver is needed.
PULWTOP BD216C or PULWTOP BD216D
Choose the PULWTOP BD216C if you use a Windows laptop and want two independent 4K 60Hz screens from a stand-dock. Choose the PULWTOP BD216D if you use a MacBook with an M4 or newer base chip or a Pro or Max chip, and want its M.2 NVMe SSD enclosure and SD/TF slot; it does not support Windows.
Check before you buy
- Your laptop runs Windows, as the PULWTOP BD216C does not support Mac
- You will use an external keyboard and mouse with the BD216C stand
- A 65W or larger PD charger is ready for the PULWTOP base
- Both of your monitors have HDMI inputs for the BD216C
The product at a glance
PULWTOP Dual Monitor Vertical Stand Dock
Best for: Closed-lid Windows desks
- Host Interface
- USB-C
- Display Support
- Dual
- Max Resolution
- 4K@60Hz
- Power Delivery
- 85W
- Port Count
- 11
- Video Ports
- HDMI
View on Amazon: PULWTOP Dual Monitor Vertical Stand Dock Affiliate link
PULWTOP's BD216C in gray is a vertical laptop stand with a built-in 11-in-1 dock: two 4K 60Hz HDMI via MST on Windows, two 10Gbps USB-C, one 10Gbps USB-A, two 5Gbps USB-A, USB 2.0, Gigabit Ethernet and 85W pass-through. Not for Mac; charger not included.
Pros
- Stand and dock in one footprint
- Two 4K 60Hz HDMI screens
- Three 10Gbps data ports
Cons
- Windows only
- No charger, SD slot or audio
- Needs external keyboard and mouse
Good fit if
- You run a Windows laptop closed on the desk
- You have two HDMI 4K monitors
Skip if
- You use a MacBook
- You want the laptop screen open beside your monitors
Verdict: A neat closed-lid dual 4K stand-dock for Windows.
Specifications side by side
| Spec | PULWTOP Dual Monitor Vertical Stand Dock |
|---|---|
| Host Interface | USB-C |
| Display Support | Dual |
| Max Resolution | 4K@60Hz |
| Power Delivery | 85W |
| Port Count | 11 |
| Video Ports | HDMI |
| Max Data Speed | 10Gbps |
| Ethernet Speed | Gigabit |
| Resolution | 4K UHD |
| Connectivity | USB-C, Ethernet |
| Refresh Rate | 60Hz |
| Features | Kickstand |
| Use | Office |
| Recommended Use | Home |
| Dimensions | 5.91 × 4.53 × 4.13 inches |
| Color | Gray |
| Model | BD216C |
Frequently asked questions
Does the PULWTOP BD216C work with a MacBook?
No, PULWTOP says it does not support Mac; the BD216D is its Mac version.
Can the PULWTOP BD216C run two 4K monitors?
Yes, two HDMI screens at 4K 60Hz each on Windows through MST.
Is a charger included with the PULWTOP BD216C?
No. PULWTOP recommends a 65W or higher PD charger; 100W input gives 85W to the laptop.
How do I wake the screens with the laptop lid closed on the PULWTOP dock?
Keep the charger connected to the PD port and use a mouse plugged into the USB 2.0 port.
Is the gray PULWTOP BD216C different from the black one?
Only in color; both listings give the same BD216C model and ports.
